Active corrosion protection and primer for metal surfaces
Good adhesive properties on a wide variety of surfaces, including in conjunction with PU and MS polymer sealing compounds
Good adhesive properties to aluminium, bare and galvanised metal sheets, steel, old paint etc.
Fast drying, depending on the thickness of the layer, after approx. 1015 min., it can be painted over
Temperature resistant up to 80C, briefly up to 140C
Easy to sand
VOC-compliant
Lower solvent content
Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)
Notice
After use, turn the can upside down and spray until the valve is empty.
Application:
Vehicle construction, ship building, metal and steel construction, tool manufacturing, bridge building, tank construction, pipeline construction, container construction, agriculture and forestry, municipal management, construction machinery etc.
Instructions
The surface must be clean, dry and free from grease. Remove loose rust, paint and dirt using a wire brush, scraper or similar tool. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Drying time 25 minutes, can be painted after approx. 1015 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.